• ATOMIUM "Active Diesel


Lubricant Composition Atomium ACTIVE Diesel + is designed for treatment of diesel engines of passenger vehicles and light trucks with mileage MORE than 50 000 km.


FEATURES


Lubricant Composition Atomium ACTIVE Diesel + is designed for treatment of diesel engines of passenger vehicles and light trucks with mileage MORE than 50 000 km.


Treatment stages

Oil volume in the oil pan

From 2 to 7 ltrs

From 7 to 10 ltrs

1st stage

1 can

2 cans

2nd stage

1 can

2 cans

3rd stage

1 can

2 cans

Treatment scheme by stages

1+1+1

2+2+2


 


Precautions: Not harmful if applied correctly.


First aid:


·         In case of a contact with skin remove the material wash out with warm water, and then wash again with soap.


·         In case of contact with eyes wash out eyes with large amount of water.


·         In case of swallowing consult a doctor


APPLICATION MODE


The 1st stage: Add Lubricant Composition Atomium ACTIVE Diesel + to the engine oil 500-1000 km before oil replacement, pour through the oil filling neck (see the graph for calculation), then run the car till the next regular oil replacement (but no less than 500 km). In case of a significant oil contamination (identify by the color of the oil on the dipstick or oil spots on filter paper) start the second stage of treatment immediately.


Recommendations (after the 1st Stage): Change oil; Replace oil and air filter.


The 2nd stage: Add Atomium ACTIVE Diesel + to the new engine oil (see the graph), and then run the car in a regular mode till the next oil replacement.


The 3rd stage: Add Atomium ACTIVE Diesel + to the new engine oil (see the graph), and then run the car in a regular mode till the next oil replacement.


Important:


·         Before applying Atomium ACTIVE Diesel + shake the can thoroughly until natural sediments (active components) are totally dissolved.


·         Apply Atomium ACTIVE Diesel + through the regular oil filling neck of the warmed-up engine.


·         After applying Atomium ACTIVE Diesel + the engine should work on single turns (at idle) for 5 min. and then run for no less than 20 min. in any mode (regular operation).


·         At mileage more than 80 000 km use our long-term Atomium MOTOR FLUSH during the 1st stage200 km before the oil change.


·         It is not recommended to apply the Lubricant at existence of mechanical breakages of parts and assemblies.


·         Atomium ACTIVE Diesel + is compatible to any type of engine oils and doesn't change their properties.


·         For providing continuous level of engine protection it is recommended to apply Atomium Regular 30 000 - 40 000 km after complete treatment with Atomium ACTIVE Diesel +.


·         After 100 000 km complete  re- treatment is recommended.


·         For turbocharged engines and forced engines the re-treatment is recommended after 50 000-55 000 km.


·         To achieve the full level of protection the treatment of all vehicle parts is recommended, such as transmission gears, hydraulic power steering etc.


EFFECTS OF APPLICATION


·         Cleans friction surfaces from lacquers and deposits on the 1st stage of treatment, including de-coking of the piston rings in their mobility;


·         Increases and stabilizes compression in the ICE cylinders (due to the formation of a new layer and sealing gaps in friction units);


·         Restores oil pressure in the engine oil system up to rated;


Write a review

Note: HTML is not translated!
    Bad           Good

ATOMIUM "Active Diesel

  • Brand: Atomium Limited
  • Product Code: ATOMIUM "Active Diesel
  • Availability: In Stock
  • $35.80

  • Ex Tax: $35.80

Contact Form